Project Description
Building Embedded Parts – OG Type
| Specification | OD(mm) | S(mm) | L(mm) | L(mm) | L(mm) |
|---|---|---|---|---|---|
| M12 | 20 | 30 | 75 | 100 | |
| M14 | 22 | 40 | 80 | 100 | |
| M16 | 25 | 40 | 80 | 150 | 200 |
| M20 | 32 | 40 | 100 | 150 | 200 |
| M24 | 36 | 50 | 150 | 200 | 250 |
| M27 | 40 | 50 | 200 | 300 |
OG Type Building embedded parts are used for lifting precast components, stripping, supporting, installing and so on. The standard products is galvanized.
Raw material: Deformed steel bar (the raw material is with good strength and resistance to pull.)
Product features:
- The resistance to pull is improved and the load can be evenly applied within the concrete by producing internal thread on deformed bar and setting holes in the bottom for inserting rebar.
- If the embedded portion of the plate is thinner, the load is dispersed by inserting rebar, so that the load is not too concentrated on the product。
Attention:
- Based on the component weight and safety factor to choose suitable parts.
- Make sure the setting depth, perpendicularity, and lifting angle of embedded parts.
- Anti-corrosive treatmentis necessary for long-lived embedded parts.
